On November 10, a massive semiconductor cluster being developed by SK Hynix in the Won Sam area of Yongin, Gyeonggi Province, was unveiled after a 90-minute drive from Seoul. The site features dozens of large cranes lifting materials, with construction vehicles and heavy machinery actively at work. Approximately 20,000 workers are engaged in 24-hour shifts at this fab construction site, which spans 4.15 million square meters, equivalent to 1.4 times the area of Yeouido.
Wearing a hard hat, the reporter entered the first fab, where a large construction elevator known as a 'climber' transports materials. This elevator can carry up to 16 tons, including forklifts. After ascending about 20 to 30 meters to the third floor, a spacious area without equipment was revealed. This section of the first fab, standing approximately 137 meters tall, is set to house the 'Trinity Fab,' which will test technologies from materials, components, and equipment (known as 'so-bu-jang') companies starting next year.
The Trinity Fab will be located to the northwest of the first fab. The clean room, covering about 1,000 pyeong (approximately 3,305 square meters), will be established on the third floor. The second and first floors will house auxiliary facilities necessary for operating process equipment, with office space also available on the first floor. A representative on-site explained that a clean room for SK Hynix's memory production will be constructed behind the walls, emphasizing that access routes and security systems will be operated separately from the mass production line.
The facility will include 51 pieces of semiconductor front-end equipment, such as etching, deposition, and cleaning tools, along with four computer systems, totaling 55 pieces of equipment and systems. This setup aims to validate technologies in an environment similar to actual mass production, using 12-inch (300 mm) wafers. The clean room will also feature 15 rental spaces for so-bu-jang companies to test their self-developed devices.
The total project cost is 874.6 billion won, with the government contributing 373.6 billion won, Gyeonggi Province and Yongin City providing 57.7 billion won, and SK Hynix investing 443.2 billion won. The clean room construction is expected to be completed by May 2027, followed by equipment installation and performance verification, with pilot services commencing in the fourth quarter of that year.
The Trinity Fab was established to address the challenges faced by so-bu-jang companies in validating mass production. Even when new materials and equipment are developed, opportunities to verify performance on actual production lines are limited, leading to lengthy commercialization timelines. SK Hynix aims to accelerate the technology development and commercialization of its partners, enhancing the competitiveness of advanced semiconductor processes and strengthening the supply chain.
Lee Jae-ho, vice president of semiconductor equipment company TES, explained during a recent briefing that discrepancies between in-house R&D facilities and actual mass production environments often lead to trial and error. Typically, it takes 5 to 6 years from equipment development to mass production application, but he anticipates that using the Trinity Fab could reduce this timeline by about a year. He also noted the advantage of sharing measurement equipment, which can cost between 1 billion and 5 billion won per unit.
Yoo Won-yang, CEO of semiconductor specialty gas company TEMC, also highlighted the difficulties of mass production validation. He stated, "To evaluate new materials, we first need to select the equipment for the production line and secure a schedule for its use. Since actual production equipment must continue operating, it is not easy to obtain evaluation opportunities." He added that validation can take anywhere from 6 months to 2 years, expressing hope that facilities like the Trinity Fab, dedicated to evaluations, could significantly expedite the process.
The Trinity Fab Foundation aims to reduce the commercialization period for so-bu-jang technologies by at least 30%. Foundation representative Lee Gi-jeong stated, "It typically takes 3 to 4 years for equipment development to enter the production lines of demand companies. Our goal is to reduce this by over a year based on a 3-year timeline." The foundation also plans to support both localization and entry into global markets.
The construction progress of the first Yongin fab is approximately 89%. Nearby, a 140,000-pyeong cooperative complex is being developed for so-bu-jang companies, with around 50 companies expected to occupy 55 plots. The Trinity Fab will operate independently to support technology validation for so-bu-jang companies, regardless of their participation in the cooperative complex. An independent non-profit organization will manage the Trinity Fab, and the usage fees will be based on the minimum costs required for facility operation.
SK Hynix is also introducing an 'R&D Challenge Compensation System' to alleviate the burden of research and development failures for its partners. This system will provide upfront funding covering up to 50% of initial development costs and will offer differentiated compensation based on the evaluation of technological achievements and contributions to the supply chain, even if development fails or does not lead to purchases. Plans are also being considered to link successful projects to actual purchases.
Lee Hyun-cheol, head of purchasing strategy at SK Hynix, remarked, "Partners have felt quite lost without a way to be compensated for failed technology development. We plan to support as many as possible, even for failed challenges, through evaluations." He added, "We expect that the technology development of our partners will contribute to the overall competitiveness of the ecosystem, benefiting Hynix as well."
* This article has been translated by AI.
Copyright ⓒ Aju Press All rights reserved.